Paramtents
Place of Origin Hunan, China (Mainland), Hunan, C
Model Number K10
Type Power Tool Parts, Hand Tool Parts
Shape round, flat, triangle and special
Usage for cutting and wear-resistant part
Certificate: ISO9001
Customized Accept
Surface Uncoated
Hardness HRA89-92
Density 16.4g/cm
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Tungsten carbide Rods Products introduction:
Part Name | K20 Extruded carbide rods |
Material | Solid Carbide |
Material Content | WC+Co+Others |
Material Grade | K10/K20/K30... |
Material Density | 14.6-14.95g/cm3 |
HRA Hardness | 86-93HRA |
HRC Hardness | 69-81HRC |
Finish | Unground/Polished |
Dimensions | Various |
Samples | Available |
Tungsten carbide Rod Specifications:
Grade | Co | Hardness | Density | Bending strength | Note:More types are available on request |
% | HRA | g/cm3 | MPa | ||
YL10.2 | 10 | 91.8 | 14.4 | 3800≥ | Classical grade for general applications. Suitable for the machining of general materials such as common steel, cast iron, stainless steel etc. Recommended to make conventional tools such as twist drills,end mills, screw taps, gun drills etc. |
XU30 | 12 | 92.8 | 14.3 | 4000≥ | Suitable for the machining of composite materials,such as stainless steel, high temprature alloy. hardened steel(especially for heat-reated steel with hardness HRC40- 60). glass fiber reinforced plastics. Recommended to make drills. end mills, reamers, gravers and screw taps, etc. |
YF06 | 6 | 92.5 | 14.8 | 3600≥ | Classical grade for rods. Suitable for the machining of composite materials such as aluminum-magnesium alloy, plastic, reinforced plastic and carbon fiber, iron-based alloys etc. Recommended for the drilling and milling of aluminum-magnesium alloys. |
Tungsten carbide Rod Drawings:
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.